Lighted white LED on/off rocker switch. 5-Pin switch with barriers.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there truck and UTV owners. Today, we're going to be taking a look at Bulldog's line of accessory switches. Today, we're going to be showing off the two most common switches. One's for LED light bars, as well as ones for a winch. Bulldog does have other switches available though for various different accessories. You can see here that they integrate right into the dash and look very similar to the factory switches that we're on our UTV.Typically, you'll see something like this in your dash of your UTV or truck.
And if you see these, these are just dummy knockouts. They don't just push in. They're not that quite a knockout, but they actually come out very easily. I just use a razor knife in most cases and just score it down there, then you can pop it in the dash or however else you want to get it out of there. Bulldog also has multi-purpose switches available.
These have no labeling on them so you can use them for whatever you like, and they come in varying colors of LEDs.So you can see here, we've got the two most common styles. You have your toggle switch, which will light to turn things on and off or alternate between two different things depending on the toggle's position. And we also have our momentary style switches here, and we're using it for our winch. A momentary style switch is only going to be activated when you're pressing the button. So it's unlike the toggle that stays on or stays in one position until you change the other.
This one's going to go to the regular position, but if we hit the button here, it operates it. And if we button the other way, it operates it as well. And this one here is multifunction. The down position pushes our winch out, and the in position draws it back in. And with both of our switches, you can see that they illuminate when they are activated.These switches are also water resistant.
So they're great for not just in your truck or UTV, they're great if you want to maybe just put one on your trailer, maybe inside of a box or a toolbox or something there. It's also good for your boats. They're great for marine applications as well.Now, these switches, again, they do come in some different pictures on the front and the pin out can be a little bit different in the back depending on this particular function. One of the things you really want to pay attention to when you're running stuff through your switches is how much current your accessories are going to draw and if your switch can handle that much current going through it.This switch here is actually pretty impressive. This LED light bar switch here is rated for up to 20 Amps. So you could run a light bar just from power with circuit protection directly through the switch to the light, which is nice. That eliminates a lot of extra wiring and accessories that you might need to power your light bar. Now, if it exceeds 20 Amps, you are going to need to go ahead and use a relay which is a more typical type of wiring. On our light bar here, this one being the monster that it is has 300 Watts of power. That's at 12 Volts. That's around 25 Amps. So it does exceed our switch here. So we did use a relay on this particular application, but if we we're using one of the shorter light bars that was only drawing only maybe 200 Watts. We could easily run that right through here and be good to go.I just want to verify that these switches are going to fit in your dash. Again, we talked about these knockouts. With the measurement, that you want to make sure you have here so that way it'll slide in. It's going to measure 13 16ths across by one and seven 16ths tall. And if you don't have any knockouts on your dash, Bulldog does have inserts available for your dash.And that completes our look at Bulldog's line of accessory switches..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.